Sealing Tech

Get Quote

Parker O-Ring

O-rings are circular sealing elements with circular cross-sections, and are mainly used in static applications. The sizes are specified by the inside diameter and the cross section diameter. Our O-rings are manufactured according to metric and imperial international standards such as AS 568B, DIN ISO 3601 and JIS. Custom sizes of almost any dimension are possible, such as miniature O-rings, special O-rings with large dimensions and continuously molded and spliced cord. We utilize O-Ring compounds formulated to meet the most stringent industry standards, including FDA, USP, KTW, DVGW, BAM, WRAS (WRC), NSF, Underwriters Laboratories (UL), Aerospace (AMS) and many customer-specific requirements.

V3642-75_zm

Fluorocarbon O-Ring, 75 Shore A, Automotive and Chemical Applications

Industry: Chemical processing

Polymer Material Options: Fluorocarbon Rubber (FKM, FPM)

Trade Name: V3642, V3642-75

Thermal Application Type: High temperature (up to 260°F to 400°F), High temperature (up to 125C to 200C) °C

Minimum Operating Temperature: -13 °F, -25 °C

Maximum Operating Temperature: 392 °F, 200 °C

Durometer: 75 Shore A

For Fluid Type: Broad range

Specifications Met: None, AS 528, ISO 3601, BS 1806, BS 4518, JIS B2401, NF T 47-501, SMS 1586

Region of Origin: Europe

Internally Lubricated: No

Colour: Black

Inside Diameter: 0.7 to 996 mm

Width: 0.5 to 9.5 mm

The Parker Prädifa fluorocarbon rubber V3642-75 is suitable for applications with demanding media.

Special Features:

  • Very good mechanical robustness
  • Good resistance to gap extrusion
  • Long life time

Chemical Resistance to:

  • Air (oil-free)
  • Compressed air (oily)
  • Fuel C
  • Diesel (water-free)
  • RME (water-free)
  • Petrol (unleaded)
  • FAM A (test fluid no. 1, DIN ISO 1817)
  • Ethane
  • Benzene
  • Natural gas
  • Petroleum (sulphur-free)
  • Mineral oils (tests with NBR-1/ECI recommended prior to use with dynamic seals)
  • Petroleum-based lubricating oils
L3355-70_zm

Fluorosilicone Rubber O-Ring, 70 Shore A, Automotive Applications

Polymer Material Options: Fluorosilicone Rubber (FVMQ)

Minimum Operating Temperature: -60 °C, -76 °F

Maximum Operating Temperature: 170 °C, 338 °F

Durometer: 70 Shore A

For Fluid Type: Fuel

Industry: Aerospace

Specifications Met: AS 528, ISO 3601, BS 1806, BS 4518, JIS B2401, NF T 47-501, SMS 1586

Region of Origin: Europe

Colour: Yellow

Inside Diameter: 21.95 to 50 mm, 0.864 to 1.969 inch

Cross Section Width: 0.070 to 0.079 inch, 1.78 to 2 mm

The Parker Prädifa fluorosilicone rubber L3355-70 is suitable for automotive, general industrial and aerospace.

Special Features:

  • Excellent cold flexibility
  • Very good biofuel and biodiesel resistance
  • Long life time

Chemical Resistance to:

  • Air (oil-free)
  • Compressed air (oily)
  • Water
  • Fuel C
  • Diesel (water-free)
  • RME (water-free)
  • Petrol (unleaded)
  • Ethanol
  • FAM A (test fluid no. 1, DIN ISO 1817)
  • FAM B (test fluid no. 2, DIN ISO 1817)
  • Glysantin G48/water
  • Water/glycol (1/1)
  • Methanol
  • Benzene
  • Petroleum (sulphur-free)
  • DOT-4
  • PAO (Polyalphaolefines)
L8585-80_zm

Fluorosilicone Rubber O-Ring, 80 Shore A, Demanding Applications

Polymer Material Options: Fluorosilicone Rubber (FVMQ)

Minimum Operating Temperature: -60 °C, -76 °F

Maximum Operating Temperature: 170 °C, 338 °F

Durometer: 80 Shore A

For Fluid Type: Fuel

Industry: Aerospace

Specifications Met: NSA 8200, NSA 8203, NF L17-261 category 61D8, AS 528, ISO 3601, BS 1806, BS 4518, JIS B2401, NF T47-501, SMS 1586

Region of Origin: Europe

Color: Blue

Inside Diameter: 145.72, 171.12 mm

Cross Section Width: 2.62 mm

The Parker Prädifa fluorosilicone rubber L8585-80 is suitable for general industry sensors, automotive and aerospace applications.

Special features:

  • Very good mechanical robustness
  • Good resistance to gap extrusion
  • Long life time

Chemical resistance to:

  • Air (oil-free)
  • Compressed air (oily)
  • Water
  • Fuel C
  • Diesel (water-free)
  • RME (water-free)
  • Petrol (unleaded)
  • Ethanol
  • FAM A (test fluid no. 1, DIN ISO 1817)
  • FAM B (test fluid no. 2, DIN ISO 1817)
  • Glysantin G48/water
  • Water/glycol (1/1)
  • Methanol
  • Petroleum (sulphur-free)
  • DOT-4
  • PAO (Polyalphaolefines)
V3852-65_zm

Highly Fluorinated Fluorocarbon O-Ring, 65 Shore A, Demanding Applications

Polymer Material Options: High Performance Fluoroelastomer (HiFluor®)

Trade Name: V3852-65, V3852

Thermal Application Type: Extremely high temperature (>400F) °F, Extremely high temperature (<200C) °C

Minimum Operating Temperature: -13 °F, -25 °C

Maximum Operating Temperature: 482 °F, 250 °C

Durometer: 65 Shore A

For Fluid Type: Broad range

Industry: General

Specifications Met: None, AS 528, ISO 3601, BS 1806, BS 4518, JIS B2401, NF T 47-501, SMS 1586

Region of Origin: Europe

Internally Lubricated: No

Colour: Black

The Parker Prädifa fluorocarbon material HiFluor® V3852-65 is suitable for a wide range of applications.

Special Features:

  • Very good biofuel & biodiesel resistance
  • Very good varnish resistance
  • Good cold flexibility
  • Good mechanical robustness
  • Very good life time

Chemical Resistance to:

  • Air (oil-free)
  • Compressed air (oily)
  • Fuel C
  • Diesel (water-free)
  • RME (water-free)
  • Petrol (unleaded)
  • Ethanol (E85, E22)
  • FAM A (test fluid no.1, DIN ISO 1817)
  • FAM B (test fluid no.2, DIN ISO 1817)
  • Shell Rimula Super R4L
  • Castrol SLX 0W30 LongLife
  • ATF oils
  • Dexron VI ATF
  • Mobil 1 + 5% Sturaco 7195
  • R134a
  • HFO1234yf
  • Freon 21, 22
  • Methanol
  • Ammonia 33%
  • Ethanol
  • Methyl-ethyl-ketone (MEK)
  • Acetone
  • Ethane
  • Benzene
  • Natural gas
  • Petroleum (sulphur-free)
  • Mineral oils (tests with NBR-1/ECI recommended prior to use with dynamic seals)
  • Di-ester-based lubricating oils
  • Petroleum-based lubricating oils
  • Lubricating oils SAE 10, 20, 30, 40, 50
  • DOT-4
  • HETG / Triglycerides (rape seed oil)
  • HEES / Synthetic esters (TMP and dicarbon acid esters, non-water-soluble)
  • HEPG / Polyalkylene glycols
  • HEPR / Polyalphaolefines and related products
  • HFC (Water/polyglycol)
  • HFDR (Organic esters of phosphoric acid / Skydrol)
  • HFDU (Synthethic fluids like silicone oils, carboxylic ester oils,polyol esters)
  • PAO (Polyalphaolefines)
N0525-60_zm

Nitrile-Butadiene Rubber O-Ring, 60 Shore A, Broad Applicability

Inside Diameter: 10.77 to 278.77 mm, 0.424 to 10.975 inch

Cross Section Width: 1.39 to 6.99 mm, 0.055 to 0.432 inch

Polymer Material Options: Nitrile Butadiene Rubber (NBR, XNBR)

Minimum Operating Temperature: -35 °C, -31 °F

Maximum Operating Temperature: 100 °C, 212 °F

Durometer: 60 Shore A

For Fluid Type: Broad Range

Industry: Other / Specialist

Specifications Met: AS 528, ISO 3601, BS 1806, BS 4518, JIS B2401, NF T 47-501, SMS 1586

Region of Origin: Europe

Colour: Black

The Parker Prädifa nitrile-butadiene rubber N0525-60 is suitable for a wide range of applications.

Special Features:

  • Good mechanical robustness
  • Good resistance to gap extrusion
  • Long life time

Chemical Resistance to:

  • Air (oil-free)
  • Compressed air (oily)
  • Methanol
  • Methyl-ethyl-ketone (MEK)
  • Ethane
  • Natural gas
  • Petroleum (sulphur-free)
  • Mineral oils (tests with NBR-1/ECI recommended prior to use with dynamic seals)
  • Petroleum-based lubricating oils
  • Lubricating oils SAE 10, 20, 30, 40, 50
  • HFC (Water/polyglycol)
  • HFAE (Oil in water emulsions; mineral oils / synthethic esters)
  • HFAS (Mineral oil free, water-based synthethic fluids)
  • PAO (Polyalphaolefines)
V8558-75_zm

Highly Fluorinated Fluorocarbon O-Ring, 75 Shore A, Automotive Applications

Polymer Material Options: High Performance Fluoroelastomer (HiFluor®)

Trade Name: V8558-75, V8858

Thermal Application Type: Extremely high temperature (>400F) °F, Extremely high temperature (>200C) °C

Minimum Operating Temperature: -13 °F, -25 °C

Maximum Operating Temperature: 482 °F, 250 °C

Durometer: 75 Shore A

For Fluid Type: Broad range

Industry: Chemical processing

Specifications Met: None, AS 528, ISO 3601, BS 1806, BS 4518, JIS B2401, NF T 47-501, SMS 1586

Region of Origin: Europe

Internally Lubricated: No

Colour: Green

The Parker Prädifa fluorcarbon material HiFluor® V8558-75 is suitable for a wide range of applications.

Special Features:

  • Very good biofuel & biodiesel resistance
  • Very good varnish resistance
  • Good cold flexibility
  • Very good mechanical robustness
  • Very good life time

Chemical Resistance to:

  • Air (oil-free)
  • Compressed air (oily)
  • Fuel C
  • Diesel (water-free)
  • RME (water-free)
  • Petrol (unleaded)
  • Ethanol (E85, E22)
  • FAM A (test fluid no.1, DIN ISO 1817)
  • FAM B (test fluid no.2, DIN ISO 1817)
  • Shell Rimula Super R4L
  • Castrol SLX 0W30 LongLife
  • ATF oils
  • Dexron VI ATF
  • Mobil 1 + 5% Sturaco 7195
  • R134a
  • HFO1234yf
  • Freon 21, 22
  • Methanol
  • Ammonia 33%
  • Ethanol
  • Methyl-ethyl-ketone (MEK)
  • Acetone
  • Ethane
  • Benzene
  • Natural gas
  • Petroleum (sulphur-free)
  • Mineral oils (tests with NBR-1/ECI recommended prior to use with dynamic seals)
  • Di-ester-based lubricating oils
  • Petroleum-based lubricating oils
  • Lubricating oils SAE 10, 20, 30, 40, 50
  • DOT-4
  • HETG / Triglycerides (rape seed oil)
  • HEES / Synthetic esters (TMP and dicarbon acid esters, non-water-soluble)
  • HEPG / Polyalkylene glycols
  • HEPR / Polyalphaolefines and related products
  • HFC (Water/polyglycol)
  • HFDR (Organic esters of phosphoric acid / Skydrol)
  • HFDU (Synthethic fluids like silicone oils, carboxylic ester oils, polyol esters)
  • PAO (Polyalphaolefines)
V0747S310_zm

Fluorocarbon O-Ring, 75 Shore A, Semiconductor Applications

Polymer Material Options: Fluorocarbon Rubber (FKM, FPM)

Trade Name: V0747S310, V747 Semicon, V0747 Semicon

Minimum Operating Temperature: -13 °F, -25 °C

Maximum Operating Temperature: 392 °F, 200 °C

Durometer: 75 Shore A

For Fluid Type: Broad Range

Industry: Semiconductor

Specifications Met: BAM (60 °C, 30 bar), DIN EN 549, EN 682, AMS7276, ADI-free, AS 528, ISO 3601, BS 1806, BS 4518, JISB2401,NF T 47-501, SMS 1586

Region of Origin: Europe

Colour: Black

Inside Diameter: n/a

Cross Section Width: n/a

The Parker Prädifa fluorocarbon rubber V0747S310-75 is suitable for a wide range of semicon applications. The gas permeability is very low and similar to butyl rubber.

Special Features:

  • Very good mechanical robustness
  • Good resistance to gap extrusion
  • Long life time

Chemical Resistance to:

  • Plasma
  • Natural gas
FF156_zm

Perfluoroelastomer 75 Durometer O-Ring, Chemically Resistant

Polymer Material Options: Perfluoroelastomer (FFKM, ULTRA®, Parofluor®)

Thermal Application Type: Extremely High temperature (>400°F)

Minimum Operating Temperature: 5 °F

Maximum Operating Temperature: 525 °F

For Fluid Type: Ultra Broad Range

Durometer: 75 Shore A

Industry: Chemical Processing

Specifications Met: None, FDA

Region of Origin: North America

Internally Lubricated: No

Colour: Black

Parker’s perfluorelastomer (Ultra® FFKM) currently offers the highest operating temperature range, the most comprehensive chemical compatibility, and the lowest off-gassing and extractable levels of any rubber material. Parker’s proprietary formulations deliver an extreme performance spectrum that make them ideal for use in critical applications like semiconductor chip manufacturing, jet engines and chemical processing equipment.

  • Heat resistance up to 275°C (525°F)
  • Cold flexibility down to -15°C (+5°F)
  • Ultra broad chemical resistance
  • Aliphatic and aromatic hydrocarbons
  • Chlorinated hydrocarbons
  • Polar solvents (ketones, esters, ethers)
  • Inorganic and organic acids
  • Water and steam
  • High vacuum with minimal loss in weight
  • Used for Broad Chemical Resistance, FDA

Not compatible with:

  • Fluorinated refrigerants (R11, 12, 13, 113, 114, etc.)
  • Perfluorinated lubricants (PFPE)
EM163_zm

Ethylene Propylene 80 Durometer O-ring, Mil/aero

Inside Diameter: 0.029 to 25.94 inch

Width: 0.04 to 0.275

Polymer Material Options: Ethylene Propylene Rubber (EPM, EPR, EPDM)

Thermal Application Type: Low temperature (<-30°F)

Minimum Operating Temperature: -80 °F

Maximum Operating Temperature: 250 °F

For Fluid Type: water/steam

Industry: Aerospace

Durometer: 80 Shore A

Specifications Met: MIL/Aero, NAS 1613 REV6, Region of Origin

Internally Lubricated: No

Colour: Black

Parker’s 80 durometer black EPDM, EM163-80, is a terpolymer of ethylene and propylene with a diene third monomer used for cross linking. This is particularly useful when sealing phosphate-ester hydraulic fluids and in brake systems that use fluids having a glycol base. Temperature range: -80°F to 250°F (-62°C to 121°C)

Certifications include:

NAS 1613 Rev 6

Not compatible with:

  • Mineral oil products (oils, greases and fuels)

Features:

  • Chemical resistance
  • Hot water and steam up to 300°F (149°C)
  • Glycol based brake fluids (Dot 3 & 4) and silicone-based brake fluids (Dot 5) up to 300°F (149°C)
  • Many organic and inorganic acids
  • Cleaning agents, sodium and potassium alkalis
  • Phosphate-ester based hydraulic fluids (HFD-R, Skydrol, Hyjet)
  • Silicone oil and grease
  • Many polar solvents (alcohols, ketones, esters)
  • Ozone, aging and weather resistant
VP316_zm

Fluorocarbon 95 Durometer O-Ring, Base Resistant, RGD, Black

Minimum Operating Temperature: -10 °F

Industry: Oil & Gas

Region of Origin: North America

Internally Lubricated: No

Specifications Met: ISO 23936-2 RGD, NACE TM0187 20% H2S

 

Durometer: 95 Shore A

Parker’s Base Resistant Elastomer (BRE-FKM), offers low temperature flexibility as low as -10°F and provides resistance to a broad range of fluids while still maintaining cost effectiveness.

Certifications include:

  • ISO 23936-2 RGD and NACE TM0187 20% H2S

Not compatible with:

  • Glycol based brake fluids
  • Ammonia gas, amines, alkalis
  • Superheated steam
  • Low molecular weight organic acids (formic and acetic acids)

Chemical resistance

  • Mineral oil and grease, ASTM oil No. 1, and IRM 902 and IRM 903 oils
  • Non-flammable hydraulic fluids (HFD)
  • Aerospace fuel systems and engine oil systems
  • Mineral and vegetable oil and grease
  • Aliphatic hydrocarbons (butane, propane, natural gas)
  • Aromatic hydrocarbons (benzene, toluene)
  • Chlorinated hydrocarbons (trichloroethylene and carbon tetrachloride)
  • Gasoline (including high alcohol content)
  • High vacuum
  • Very good ozone, weather and aging resistance
  • Amines, bases, and high pH fluids
VP309_zm

Fluorocarbon 80 Durometer O-Ring, Base Resistant, RGD, Black

Minimum Operating Temperature: -10 °F

Industry: Oil & Gas

Region of Origin: North America

Internally Lubricated: No

Specifications Met: ISO 23936-2 RGD

Durometer: 80 Shore A

Parker’s Base Resistant Elastomer (BRE-FKM), offers low temperature flexibility as low as -10°F and provides resistance to a broad range of fluids while still maintaining cost effectiveness.

Certifications include:

  • ISO 23936-2 RGD

Not compatible with:

  • Glycol based brake fluids
  • Superheated steam
  • Low molecular weight organic acids (formic and acetic acids)

Chemical resistance

  • Mineral oil and grease, ASTM oil No. 1, and IRM 902 and IRM 903 oils
  • Non-flammable hydraulic fluids (HFD)
  • Aerospace fuel systems and engine oil systems
  • Mineral and vegetable oil and grease
  • Aliphatic hydrocarbons (butane, propane, natural gas)
  • Aromatic hydrocarbons (benzene, toluene)
  • Chlorinated hydrocarbons (trichloroethylene and carbon tetrachloride)
  • Gasoline (including high alcohol content)
  • High vacuum
  • Very good ozone, weather and aging resistance
  • Amines, bases, and high pH fluids
KB292_zm

Hydrogenated Nitrile 95 Durometer O-Ring, Extreme Extrusion Resistance, Black

Minimum Operating Temperature: -25 °F

Industry: Oil & Gas

Region of Origin: North America

Internally Lubricated: No

Specifications Met: None

Durometer: 95 Shore A

Parker’s KB292-95 compound is formulated to offer best in class resistance to extrusion for the highest of pressure applications. With an operating temperature range of -25°F to 300°F, and chemical compatibility in line with traditional hydrogenated nitrile (HNBR) compounds, KB292-95 truly expands the capabilities of this polymer family.

  • Heat resistance — Up to 150°C (300°F)
  • Cold flexibility — Down to approximately -32°C (-25°F)

Used for oilfield, high temperature hydraulics

 

Chemical resistance

  • Aliphatic hydrocarbons
  • Vegetable and animal fats and oils
  • HFA, HFB and HFC hydraulic fluids
  • Dilute acids, bases and salt solutions at moderate temperatures
  • Water and steam up to 149°C (300°F)
  • Ozone, aging and weathering

Not compatible with:

  • Chlorinated hydrocarbons
  • Polar solvents (ketones, esters and ethers)
  • Strong acids
VA179_zm

Fluorocarbon 70 Durometer O-Ring, High Temperature, Black

Minimum Operating Temperature: -10 °F

Industry: Semiconductor

Region of Origin: North America

Internally Lubricated: No

Durometer: 70 Shore A

Parker’s VA179 (Fluorocarbon 70 Durometer) has excellent compression set resistance at temperatures exceeding the capability of traditional fluorocarbon (FKM) options. This makes VA179 the longest lasting fluorocarbon seal in the industry capable up to even 225°C (437°F). VA179 can be used across a range of markets including General Industrial, Automotive, Aerospace and Semiconductor.

Chemical resistance

  • Mineral oil and grease, ASTM oil No. 1, and IRM 902 and IRM 903 oils
  • Non-flammable hydraulic fluids (HFD)
  • Aerospace fuel systems and engine oil systems
  • Mineral and vegetable oil and grease
  • Aliphatic hydrocarbons (butane, propane, natural gas)
  • Aromatic hydrocarbons (benzene, toluene)
  • Chlorinated hydrocarbons (trichloroethylene and carbon tetrachloride)
  • Gasoline (including high alcohol content)
  • High vacuum
  • Very good ozone, weather and aging resistance

Not compatible with:

  • Glycol based brake fluids
  • Ammonia gas, amines, alkalis
  • Superheated steam
  • Low molecular weight organic acids (formic and acetic acids)
HF359_zm

High Performance Fluoroelastomers 80 Durometer O-Ring, Plasma Resistant, Bridging Technology, Tan

Minimum Operating Temperature: -15 °C

Maximum Operating Temperature: 400 °F

Industry: Semiconductor

Specifications Met: None, North America

Durometer: 80 Shore A

Internally Lubricated: No

Parker’s HF359-80 is a cost-effective semiconductor solution with improved etch resistance over other Hifluor options. HF359 is the ideal solution for areas of the tool where FFKM materials are excessive. HF359 has improved cleanliness and plasma resistance compared to fluorocarbon, but is a cost-effective alternative to FFKM.

  • Heat Resistance – Up to 204°C (400°F)
  • Cold flexibility – Down to -26°C (-15°F) static and -18°C (0°F) dynamically

Chemical resistance includes

  • Good plasma and etch resistance
  • Aliphatic and aromatic hydrocarbons
  • Chlorinated hydrocarbons
  • Inorganic and organic acids

Not compatible with:

  • Fluorinated refrigerants (R11, 12, 13, 113, 114, etc.)
  • Perfluorinated lubricants (PFPE)
E9330-70_zm

Ethylene Propylene Rubber O-Ring, 70 Shore A, General Industrial and Consumer Applications

Inside Diameter: n/a

Cross Section Width: n/a

Industry: General Industrial

Polymer Material Options: Ethylene Propylene Rubber (EPM, EPR, EPDM)

Minimum Operating Temperature: -58 °F, -50 °C

Maximum Operating Temperature: 302 °F, 150 °C

Durometer: 70 Shore A

Region of Origin: Europe

Colour: Black

The Parker Prädifa ethylene propylene rubber E9330-70 is suitable for a wide range of applications.

Special Features:

  • Very good mechanical robustness
  • Excellent resistance against water/glycol and acids, cleaning agents, many polar solvents
  • Long life time

Chemical Resistance to:

  • Air (oil-free)
  • Steam
  • Water
  • Glysantin G48/water
  • Water/glycol (1/1)
  • R134a
  • HFO1234yf
  • Hydrochloric acid (3-molar)
  • Hydrochloric acid (concentrated)
  • Acetic acid (1-molar)
  • AdBlue® urea / water (32,5/67,5)
  • Ammonia 33%
  • Methanol
  • Ethanol
  • Methyl-ethyl-ketone (MEK)
  • Acetone
  • DOT-4
  • HEPG / Polyalkylene glycols
  • HFC (Water/polyglycol)
  • Ozone
  • Hydrogen
B8885-70_zm

Chlorine-Butyl Rubber O-Ring , 70 Shore A, General Industrial Applications

Inside Diameter: n/a

Cross Section Width: n/a

Industry: General Industrial

Polymer Material Options: Butyl Rubber (IIR)

Minimum Operating Temperature: -60 °F, -76 °C

Maximum Operating Temperature: 248 °F, 120 °C

Durometer: 70 Shore A

Region of Origin: Europe

Colour: Black

The Parker Prädifa chlorine-butyl rubber B8885-70 is suitable for a wide range of applications.

Special Features:

  • Good mechanical robustness
  • Excellent permeation behaviour
  • Long life time

Chemical Resistance to:

  • Hot Water and steam
  • Break fluids on glycol base
  • Many acids
  • Salt solutions
  • Polar solutions
  • Hydraulic fluids based on polyglycol (HFC fluids)
  • Hydraulic fluids based on phosphate ester (HFD-R fluids)
  • Silicone oil and grease
  • Skydrol 500 and 7000
  • R744 (CO2)
  • Refrigerant oil based on polyglycol (PAG)
  • Ozone
  • Hydrogen
N9040-70_zm

Nitrile-Butadiene Rubber O-Ring, 70 Shore A, Broad Applicability

Inside Diameter: n/a

Cross Section Width: n/a

Polymer Material Options: Nitrile Butadiene Rubber (NBR, XNBR)

For Fluid Type: Broad Range

Industry: General Industrial, Consumer, Fluid Power

Minimum Operating Temperature: -35 °C, -31 °F

Maximum Operating Temperature: 100 °C, 212 °F

Specifications Met: PAH reduced

Durometer: 70 Shore A

Colour: Black

Region of Origin: Europe

The Parker Prädifa nitrile-butadiene rubber N9040-70 is suitable for a wide range of applications.

Special Features:

  • Good mechanical robustness
  • Very good resistance to gap extrusion
  • PAH reduced

Chemical Resistance to:

  • Air (oil-free)
  • Compressed air (oily)
  • Methanol
  • Methyl-ethyl-ketone (MEK)
  • Ethane
  • Natural gas
  • Petroleum (sulphur-free)
  • Mineral oils (tests with NBR-1/ECI recommended prior to use with dynamic seals)
  • Petroleum-based lubricating oils
  • Lubricating oils SAE 10, 20, 30, 40, 50
  • HFC (Water/polyglycol)
  • HFAE (Oil in water emulsions; mineral oils / synthethic esters)
  • HFAS (Mineral oil free, water-based synthethic fluids)
  • PAO (Polyalphaolefines)
FF362_zm

Perfluoroelastomer 75 Durometer O-Ring, High Temperature and Aggressive Chemistries

Inside Diameter: 0.029 to 25.94 inch

Width: 0.04 to 0.275 inch

Polymer Material Options: Perfluoroelastomer (FFKM, ULTRA®, Parofluor®)

Trade Name: Perfluoroelastomer, Parofluor

Durometer: 75 Shore A

Thermal Application Type: Extremely High Temperature / > 400 °F

Minimum Operating Temperature: 5 °F

Maximum Operating Temperature: 608 °F

For Fluid Type: Ultra broad range

Industry: Semiconductor

Specifications Met: None

Region of Origin: North America

Internally Lubricated: No

Colour: White

Parker compound FF362-75 is a white, high temperature, ultra-high purity perfluorinated elastomer. FF362-75 seals resist compression set and offer temperature resistance up to 608°F.

Temperature performance:

  • Heat resistance: Up to 320°C (608°F)
  • Cold flexibility: Down to -15°C (5°F)

Not recommended for:

  • Fluorinated refrigerants (R11, R12, R13, R113, R114)
  • Heat transfer fluids (Fomblin, Novec, ect)
  • Uranium hexafluoride
  • Molten metals
  • Gaseous and alkali metals

Chemical Resistance:

  • Aliphatic hydrocarbons (propane, butane, natural gas)
  • Aromatic hydrocarbons (benzene, toluene)
  • Chlorinated hydrocarbons (trichloroethylene and carbon tetrachloride)
  • Polar solvents (acetone, methylethylketone, dioxane)
  • Inorganic and organic acids, bases (under appropriate temperatures)
  • Water and steam (under appropriate temperatures)
  • Wet/dry chlorine
  • High vacuum – low permeability
FF364_zm

Perfluoroelastomer 65 Durometer O-Ring, High Temperature and Aggressive Chemistries

Inside Diameter: 0.029 to 25.94 inch

Width: 0.04 to 0.275 inch

Polymer Material Options: Perfluoroelastomer (FFKM, ULTRA®, Parofluor®)

Trade Name: Perfluoroelastomer, Parofluor

Durometer: 65 Shore A

Thermal Application Type: Extremely High Temperature / > 400 °F

Minimum Operating Temperature: 5 °F

Maximum Operating Temperature: 608 °F

For Fluid Type: Ultra broad range

Industry: Semiconductor

Specifications Met: None

Region of Origin: North America

Internally Lubricated: No

Colour: White

Parker compound FF364-65 is a low closure force, white, high temperature perfluorinated elastomer. Soft properties allow for installation of O-rings and other seals into grove shapes such as dovetails and radius corner designs. FF364-65 seals resist compression set and offer temperature resistance up to 608°F.

Temperature performance:

  • Heat resistance: Up to 320°C (608°F)
  • Cold flexibility: Down to -15°C (5°F)

Not recommended for:

  • Fluorinated refrigerants (R11, R12, R13, R113, R114)
  • Heat transfer fluids (Fomblin, Novec, ect)
  • Uranium hexafluoride
  • Molten metals
  • Gaseous and alkali metals

Chemical Resistance:

  • Aliphatic hydrocarbons (propane, butane, natural gas)
  • Aromatic hydrocarbons (benzene, toluene)
  • Chlorinated hydrocarbons (trichloroethylene and carbon tetrachloride)
  • Polar solvents (acetone, methylethylketone, dioxane)
  • Inorganic and organic acids, bases (under appropriate temperatures)
  • Water and steam (under appropriate temperatures)
  • Wet/dry chlorine
  • High vacuum – low permeability
FF500_zm

Perfluoroelastomer 75 Durometer O-Ring, Chemical resistant

Inside Diameter: 0.029 to 25.94 inch

Width: 0.04 to 0.275 inch

Polymer Material Options: Perfluoroelastomer (FFKM, ULTRA®, Parofluor®)

Thermal Application Type: Extremely High temperature (>400°F)

Minimum Operating Temperature: 5 °F

Durometer: 75 Shore A

Maximum Operating Temperature: 525 °F

For Fluid Type: Ultra broad range

Industry: General

Specifications Met: Food, FDA

Region of Origin: North America

Internally Lubricated: No

Colour: Black

Parker’s perfluoroelastomer (Ultra® FFKM) currently offers the highest operating temperature range, the most comprehensive chemical compatibility, and the lowest off-gassing and extractable levels of any rubber material. Parker’s proprietary formulations deliver an extreme performance spectrum that make them ideal for use in critical applications like semiconductor chip manufacturing, jet engines and chemical processing equipment.

  • Heat resistance
  • Up to 320°C (608°F)
  • Cold flexibility
  • -18°C to -26°C (0°F to -15°F)
  • Chemical resistance
  • Aliphatic and aromatic hydrocarbons
  • Chlorinated hydrocarbons
  • Polar solvents (ketones, esters, ethers)
  • Inorganic and organic acids
  • Water and steam
  • High vacuum with minimal loss in weight

Not compatible with:

  • Fluorinated refrigerants (R11, 12, 13, 113, 114, etc.)
  • Perfluorinated lubricants (PFPE)
  • Used for Broad Chemical Resistance, FDA
V0884-75_zm

Fluorocarbon O-Ring, 75 Shore A, Broad Applicability

Inside Diameter: 2.5 to 532.21 mm

For Fluid Type: Broad Range

Cross Section Width: 1 to 14 mm

Polymer Material Options: Fluorocarbon Rubber (FKM, FPM)

Trade Name: V0884, V884, V0884-75

Minimum Operating Temperature: -13 °F, -25 °C

Maximum Operating Temperature: 392 °F, 200 °C

Durometer: 75 Shore A

Industry: General Industrial

Specifications Met: UL, DIN EN 549, AS 528, ISO 3601, BS 1806, BS 4518, JIS B2401, NF T 47-501, SMS 1586

Region of Origin: Europe

Colour: Brown

The Parker Prädifa fluorocarbon rubber V0884-75 is suitable for a wide range of applications.

Special Features:

  • Very good mechanical robustness
  • Good resistance to gap extrusion
  • Long life time

Chemical Resistance to:

  • Air (oil-free)
  • Compressed air (oily)
  • Fuel C
  • Diesel (water-free)
  • RME (water-free)
  • Petrol (unleaded)
  • FAM A (test fluid no. 1, DIN ISO 1817)
  • Ethane
  • Benzene
  • Natural gas
  • Petroleum (sulphur-free)
  • Mineral oils (tests with NBR-1/ECI recommended prior to use with dynamic seals)
  • Petroleum-based lubricating oils
V1164_zm

Fluorocarbon 75 Durometer O-Ring, Low Compression

Specifications Met: n/a

Inside Diameter: 0.029 to 25.94 inch

Width: 0.04 to 0.275 inch

Polymer Material Options: Fluorocarbon Rubber (FKM, FPM)

Minimum Operating Temperature: -15 °F

Maximum Operating Temperature: 400 °F

Durometer: 75 Shore A

For Fluid Type: Broad range

Industry: General

Region of Origin: North America

Internally Lubricated: No

Colour: Black

Thermal Application Type: High temperature (260°F-400°F)

Parker’s Fluorocarbon 75 Durometer O-Ring, Low Compression (V1164-75 GP) has excellent compression set resistance coupled with the wide chemical resistance expected for a viton type of material. 

Certifications include:

  • UL listing

Not compatible with:

  • Glycol based brake fluids
  • Ammonia gas, amines, alkalis
  • Superheated steam
  • Low molecular weight organic acids (formic and acetic acids)

Chemical resistance

  • Mineral oil and grease, ASTM oil No. 1, and IRM 902 and IRM 903 oils
  • Non-flammable hydraulic fluids (HFD)
  • Aerospace fuel systems and engine oil systems
  • Mineral and vegetable oil and grease
  • Aliphatic hydrocarbons (butane, propane, natural gas)
  • Aromatic hydrocarbons (benzene, toluene)
  • Chlorinated hydrocarbons (trichloroethylene and carbon tetrachloride)
  • Gasoline (including high alcohol content)
  • High vacuum
  • Very good ozone, weather and aging resistance
V1226_zm

Fluorocarbon 75 Durometer O-Ring, Low Compression, Brown

Inside Diameter: 0.029 to 25.94 inch

Width: 0.04 to 0.275 inch

Minimum Operating Temperature: -15 °F

Maximum Operating Temperature: 400 °F

Specifications Met: UL-Gas, UL-GasAlc, UL-ApKer, UL-FuelOil, AMS7276, UL, MIL/Aero

Region of Origin: North America

Internally Lubricated: No

Colour: Brown

For Fluid Type: Broad range

Polymer Material Options: Fluorocarbon Rubber (FKM, FPM)

Thermal Application Type: High temperature (260°F-400°F)

Durometer: 75 Shore A

Parker’s Fluorocarbon 75 Durometer O-Ring, Low Compression , Brown (V1226-75) Fluorocarbon has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals. Low temperature resistance is normally not favourable and for static applications is limited to approximately -26°C (-15°F) although certain compounds are suitable down to -46°C (-50°F). Under dynamic conditions, the lowest service temperature is between -15°C and -18°C (5°F and 0°F). Gas permeability is very low and similar to that of butyl rubber. Special FKM compounds exhibit an improved resistance to acids and fuels.

  • Heat resistance
  • Up to 204°C (400°F) and higher temperatures with shorter life expectancy
  • Cold flexibility
  • Down to -26°C (-15°F) (some to -46°C) (-50°F)
  • Chemical resistance
  • Mineral oil and grease, ASTM oil No. 1, and IRM 902 and IRM 903 oils
  • Non-flammable hydraulic fluids (HFD)
  • Silicone oil and grease
  • Mineral and vegetable oil and grease
  • Aliphatic hydrocarbons (butane, propane, natural gas)
  • Aromatic hydrocarbons (benzene, toluene)
  • Chlorinated hydrocarbons (trichloroethylene and carbon tetrachloride)
  • Gasoline (including high alcohol content)
  • High vacuum
  • Very good ozone, weather and aging resistance

Not compatible with:

  • Glycol based brake fluids
  • Ammonia gas, amines, alkalis
  • Superheated steam
  • Low molecular weight organic acids (formic and acetic acids)
  • Used for Low Compression Set, AMS 7276, AMS-R-82485, UL Listed